Activation & Modification of Measurement Standards

1. The ruler function for nose measurement is initially disabled. To enable it, you must set and register the measurement criteria.

2. Tap the Edit button to adjust and register the settings.

3. The nose analysis feature is currently under development and will be available in a future update

Registering Measurement Standards (Default Setting)

1. The measurement is automatically set based on the distance between the glabella (the area between the eyebrows) and the nose tip. This default setting cannot be manually adjusted or moved.

2. You can modify the values by directly entering the millimeter(mm) measurement.

3. Once saved, the ruler function will be activated based on the registered values.

⚠ Important Notice

Photos where hands are visible may interfere with automatic measurement. Please upload a profile (side-view) photo instead. If you need to adjust the measurement points, use the Custom Mode, which allows manual modifications.

Custom Measurement (Premium Feature)

1. Select Custom Mode and use an object with a known length, such as a ruler, while taking the photo.

2. Move and adjust the measurement points, ensuring that the object remains parallel to the nose from the camera’s perspective.

3. The custom length can be manually entered for more precise measurements.

⚠ Important Notice

Do not attempt to measure the nose directly without using a reference object like a ruler or a similar item.

Using the Ruler After Registering Measurement Standards

1. Once the measurement criteria are registered, the ruler function will be automatically enabled.

2. You can freely measure at any desired points based on the registered criteria.